Witam,
Jeśli chodzi o pdf, to chciałbym, żeby się nie zacinała przy przeglądaniu dużych pdf'ów. Interfejs na qt, qtk, wszystko jedno.
Menedżer plików nie musi być lekki, ważne żeby miał mało zależności i jakiś normalny wygląd i był wygodny w użyciu. Thunar, ROX oczywiście jest mi dobrze znany. Z Nautilusem chyba się pokłóciłem, bo jak go zobaczyłem po zainstalowaniu, to się przestraszyłem nieco. :P
Nie wiecie czy można zrobić automontowanie pendrivów, ale bez użycia hal? Chciałbym się już go pozbyć, tzn. i tka już go nie mam. Nie chce mi się bawić w jego konfiguracje, bo jak zwykle musi w nim coś nie działać.
Tak na marginesie, co sięstało z endel'em i jego blogiem? Tzn. bardzo fajny był często tam zaglądałem.
Pozdrawiam
Offline
Pdf: xpdf, evince
Menedżer: PcManFm
?
Offline
W archu niestety pcmanfm ma hal w zależnościach.
Ale jest jeszcze w AUR
aur/pcmanfm-experimental 0.4.4.2-1 (64) Lightweight file manager which features tabbed browsing, samba and ftp support aur/pcmanfm-fuse 770-4 (61) A fast and light file manager with remote file system mounting support
Może któryś z nich nie potrzebuje hala.
Offline
No właśnie, a jak ma się montowanie nośników bez hala w Pcmanfm?
Offline
Zainstalowałem z AUR
aur/pcmanfm-git 20100722-1 [20100808-1 installed] (127)
Ten nie potrzebuje hala.
Co do montowania to musisz sobie skonfigurować wg
http://wiki.archlinux.org/index.php/PCManFM
i ładnie działa montuje płyty,peny
Offline
Ja nie napisałem, ale dystrybucja mi się zmienia na Gentoo, ale tam to chyba będę musiał poszukac nowszej wersji niż ta, która jest dostępna w portage. Tzn. skompilowałem udisks, dodałem wpisy do .xinitrc, dbus wystartowany, ale automontowania nie ma.
Dziękuję za pomoc. Evince mi pasuje, pcmanfm też nie kuje w oczy.
Offline
Ważny jest ten fragment z linku który podałem
Then edit the file /usr/share/polkit-1/actions/org.freedesktop.devicekit.disks.policy Or if that file is empty edit this file /usr/share/polkit-1/actions/org.freedesktop.udisks.policy and replace all instances of <allow_any>no</allow_any> with <allow_any>yes</allow_any>
Musialem to zrobić zarówno na archu jak i na debianie aby automontowanie działało.
Ostatnio edytowany przez ilin (2010.08.09 16:35:21)
Offline
Mimo wszystko chyba pcmanfm w tej wersji tego nie obsługuje. Wpisy zmienione.
[ebuild R ] sys-apps/dbus-1.2.24 USE="X -debug -doc (-selinux) -test" 0 kB [ebuild R ] x11-misc/pcmanfm-0.9.7-r1 USE="udev -debug -hal" 0 kB [ebuild R ] sys-fs/udev-160 USE="extras (-selinux) -test" 0 kB [ebuild R ] sys-fs/udisks-1.0.1-r1 USE="nls -bash-completion -debug -doc -remote-access" 0 kB
Offline
Ja już chyba za dużo Gnome'a mam w systemie. Czasem myśle, że nautilus jest całkiem fajnym menedzerem. Przekompilowałem
[ebuild R ] gnome-base/gvfs-1.6.3 USE="http udev -archive -avahi -bash-completion -bluetooth -cdda -doc -fuse -gdu* -gnome -gnome-keyring -gphoto2 -hal -iphone -samba" 0 kB
z flagą gdu i nazwy urządzeń się pojawiły, jak i w Nautilusie i Pcmanfm'ie. Można jakoś nadać etykiety? Chociaż tym znanym urządzeniom. (tune2fs -L nazwa dla ext), ale NTFS nie chciałbym ruszać, tylko coś im tymczasowego przypisać. Można?
Jeszcze taki mały problem z NTFS:
Error mounting: mount: unknown filesystem type 'ntfs'
ale póki co rozwiązałem go tak:
ln -s /bin/ntfs-3g /sbin/mount.ntfs
Btw. ten config musi leżeć w /usr? Jakoś nie lubie modyfikować tam plików, bo dla mnei to on powinien leżeć w /etc.
Ostatnio edytowany przez hornet (2010.08.10 02:32:04)
Offline
Skoro używasz ntfs-3g, typem systemu plików jest ntfs-3g a nie ntfs.
Offline
A jak o tym powiedzieć nautulisowi, albo pcmanfm'owi?
Offline
Dopisać do /etc/fstab
Offline
To wtedy urządzeń już nie widzi tych, które dopisałem do fstab.
Offline
U mnie pokazuje
Porób sobie zakładki dla folderów w których montuje i po problemie.
Offline
kodzik :
Pdf: xpdf, evince
Oraz epdfview.
Osobiście używam evince (kompilacja bez GNOME), ponieważ oprócz PDF obsługuje szereg innych formatów.
Ostatnio edytowany przez azhag (2010.08.10 22:57:29)
Offline
Osobiście używam evince (kompilacja bez GNOME), ponieważ oprócz PDF obsługuje szereg innych formatów.
do tego zapamietuje strone ostatnio przegladana w danym pdf, dla mnie bardzo przydatne
Offline
ilin :
U mnie pokazuje
Porób sobie zakładki dla folderów w których montuje i po problemie.
Chyba wiem czemu... nie używasz /mnt, tylko /media, prawda?
Właściwie to czemu się to zmieniło na media? Stosunkowo niedawno.
Co do epdfview to troszkę lubiło się zacinać, dlatego dziękuję Wam za wskazanie evince.
Dziękuję za pomoc
Ostatnio edytowany przez hornet (2010.08.14 00:56:45)
Offline
hornet :
Chyba wiem czemu... nie używasz /mnt, tylko /media, prawda?
Właściwie to czemu się to zmieniło na media?Stosunkowo niedawno.
Właściwie to aktualna wersja standardu pochodzi z 2004 roku, ale pierwsza wersja została opublikowana dekadę wcześniej.
/media jest katalogiem dla removeable media, czyli dyskietek, kart pamięci, pendrive'ów, płyt CD, taśm magnetycznych (kiedy jeszcze ich używano).
/mnt jest katalogiem dla systemów plików które trzeba tymczasowo podłączyć. NFS, zasoby samby, (zewnętrzny) dysk dla kopii zapasowych i tym podobne.
Offline
hornet plik /usr/share/polkit-1/actions/org.freedesktop.udisks.policy
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE policyconfig PUBLIC "-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN" "http://www.freedesktop.org/standards/PolicyKit/1.0/policyconfig.dtd"> <policyconfig> <vendor>The udisks Project</vendor> <vendor_url>http://udisks.freedesktop.org/</vendor_url> <icon_name>drive-removable-media</icon_name> <action id="org.freedesktop.udisks.filesystem-mount"> <description>Mount a device</description> <description xml:lang="da">Montér en enhed</description> <description xml:lang="de">Gerät einhängen</description> <message>Authentication is required to mount the device</message> <message xml:lang="da">Autorisering er påkrævet for at montere et fil system</message> <message xml:lang="de">Zugriffsrechte werden benötigt um das Gerät einzuhängen</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.filesystem-mount-system-internal"> <description>Mount a system-internal device</description> <description xml:lang="da">Montér en intern enhed</description> <description xml:lang="de">Eingebautes Gerät einhängen</description> <message>Authentication is required to mount the device</message> <message xml:lang="da">Autorisering er påkrævet for at montere et fil system</message> <message xml:lang="de">Zugriffsrechte werden benötigt um das Gerät einzuhängen</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin_keep</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.filesystem-check"> <description>Check file system on a device</description> <description xml:lang="da">Check fil system for en enhed</description> <description xml:lang="de">Dateisystem auf einem Gerät prüfen</description> <message>Authentication is required to check the file system on the device</message> <message xml:lang="da">Autorisering er påkrævet for at checke fil systemet på en enhed</message> <message xml:lang="de">Zugriffsrechte werden benötigt um das Dateisystem auf dem Gerät zu prüfen</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.filesystem-check-system-internal"> <description>Check file system of a system-internal device</description> <description xml:lang="da">Check fil system for en intern enhed</description> <description xml:lang="de">Dateisystem auf einem eingebauten Gerät prüfen</description> <message>Authentication is required to check the file system on the device</message> <message xml:lang="da">Autorisering er påkrævet for at checke fil systemet på en enhed</message> <message xml:lang="de">Zugriffsrechte werden benötigt um das Dateisystem auf dem Gerät zu prüfen</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin_keep</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.filesystem-unmount-others"> <description>Unmount a device mounted by another user</description> <description xml:lang="da">Afmontér en enhed monteret af en anden bruger</description> <description xml:lang="de">Gerät eines anderen Benutzers aushängen</description> <message>Authentication is required to unmount devices mounted by another user</message> <message xml:lang="da">Autorisering er påkrævet for at afmontere enheder monteret af en anden bruger</message> <message xml:lang="de">Zugriffsrechte werden benötigt um ein Gerät auszuhängen, das ein anderer Benutzer eingehängt hat</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.filesystem-lsof"> <description>List open files</description> <description xml:lang="da">Vis åbne filer</description> <description xml:lang="de">Offene Dateien anzeigen</description> <message>Authentication is required to list open files on a mounted file system</message> <message xml:lang="da">Autorisering er påkrævet for at liste åbne filer</message> <message xml:lang="de">Zugriffsrechte werden benötigt um offene Dateien auf einem eingehängen Dateisystem anzuzeigen</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.filesystem-lsof-system-internal"> <description>List open files on a system-internal device</description> <description xml:lang="da">Vis åbne filer på en intern enhed</description> <description xml:lang="de">Offene Dateien auf einem eingebauten Gerät anzeigen</description> <message>Authentication is required to list open files on a mounted file system</message> <message xml:lang="da">Autorisering er påkrævet for at liste åbne filer</message> <message xml:lang="de">Zugriffsrechte werden benötigt um offene Dateien auf einem eingehängen Dateisystem anzuzeigen</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin_keep</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.drive-eject"> <description>Eject media from a device</description> <description xml:lang="de">Medium aus Gerät auswerfen</description> <message>Authentication is required to eject media from the device</message> <message xml:lang="da">Autorisering er påkrævet for at skubbe medie ud af en enhed</message> <message xml:lang="de">Zugriffsrechte werden benötigt um das Medium aus dem Gerät auszuwerfen</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.drive-detach"> <description>Detach a drive</description> <description xml:lang="de">Laufwerk trennen</description> <message>Authentication is required to detach the drive</message> <message xml:lang="de">Zugriffsrechte werden benötigt um das Laufwerk zu trennen</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.change"> <description>Modify a device</description> <description xml:lang="da">Modificér en enhed</description> <description xml:lang="de">Gerät ändern</description> <message>Authentication is required to modify the device</message> <message xml:lang="da">Autorisering er påkrævet for at ændre en enhed</message> <message xml:lang="de">Zugriffsrechte werden benötigt um das Gerät zu ändern</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.change-system-internal"> <description>Modify a system-internal device</description> <description xml:lang="da">Modificér en intern enhed</description> <description xml:lang="de">Eingebautes Gerät ändern</description> <message>Authentication is required to modify the device</message> <message xml:lang="da">Autorisering er påkrævet for at ændre en enhed</message> <message xml:lang="de">Zugriffsrechte werden benötigt um das Gerät zu ändern</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin_keep</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.drive-ata-smart-refresh"> <description>Refresh ATA SMART data</description> <description xml:lang="da">Læs ATA SMART data</description> <description xml:lang="de">ATA-SMART-Daten aktualisieren</description> <message>Authentication is required to refresh ATA SMART data</message> <message xml:lang="da">Autorisering er påkrævet for at læse ATA SMART data</message> <message xml:lang="de">Zugriffsrechte werden benötigt um ATA-SMART-Daten zu aktualisieren</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.drive-ata-smart-selftest"> <description>Run ATA SMART Self Tests</description> <description xml:lang="da">Kør ATA SMART selv checks</description> <description xml:lang="de">ATA-SMART-Selbsttest starten</description> <message>Authentication is required to run ATA SMART self tests</message> <message xml:lang="da">Autorisering er påkrævet for at køre ATA SMART selvcheck</message> <message xml:lang="de">Zugriffsrechte werden benötigt um ATA-SMART-Selbsttests zu starten</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.drive-ata-smart-retrieve-historical-data"> <description>Retrieve historical ATA SMART data</description> <description xml:lang="da">Hent historisk ATA SMART data</description> <description xml:lang="de">Historische ATA-SMART-Daten holen</description> <message>Authentication is required to retrieve historical ATA SMART data</message> <message xml:lang="da">Autorisering er påkrævet for at hente historisk ATA SMART data</message> <message xml:lang="de">Zugriffsrechte werden benötigt um historische ATA-SMART-Daten zu holen</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.luks-unlock"> <description>Unlock an encrypted device</description> <description xml:lang="da">Åbn en krypteret enhed</description> <description xml:lang="de">Verschlüsseltes Gerät entsperren</description> <message>Authentication is required to unlock an encrypted device</message> <message xml:lang="da">Autorisering er påkrævet for at åbne en krypteret enhed</message> <message xml:lang="de">Zugriffsrechte werden benötigt um ein verschlüsseltes Gerät zu entsperren</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.luks-lock-others"> <description>Lock an encrypted device unlocked by another user</description> <description xml:lang="da">Lås en krypteret enhed åbnet af en anden bruger</description> <description xml:lang="de">Verschlüsseltes Gerät eines anderen Benutzers sperren</description> <message>Authentication is required to lock an encrypted device unlocked by another user</message> <message xml:lang="da">Autorisering er påkrævet for at låse en krypteret enhed åbnet af en anden bruger</message> <message xml:lang="de">Zugriffsrechte werden benötigt um ein verschlüsseltes Gerät zu sperren, das ein anderer Benutzer entsperrt hat</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.linux-md"> <description>Configure Linux Software RAID</description> <description xml:lang="da">Konfigurér Software RAID</description> <description xml:lang="de">Linux Software-RAID konfigurieren</description> <message>Authentication is required to configure Linux Software RAID devices</message> <message xml:lang="da">Autorisering er påkrævet for at konfigurere RAID enheder</message> <message xml:lang="de">Zugriffsrechte werden benötigt um Linux Software-RAID-Geräte zu konfigurieren</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin_keep</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.linux-lvm2"> <description>Configure Linux LVM2</description> <message>Authentication is required to configure Linux LVM2</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin_keep</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.cancel-job-others"> <description>Cancel a job initiated by another user</description> <description xml:lang="da">Afbryd job påbegyndt af en anden bruger</description> <description xml:lang="de">Auftrag eines anderen Benutzers abbrechen</description> <message>Authentication is required to cancel a job initiated by another user</message> <message xml:lang="da">Autorisering er påkrævet for at afbryde et job påbegyndt af en anden bruger</message> <message xml:lang="de">Zugriffsrechte werden benötigt um einen Auftrag eines anderen Benutzers abzubrechen</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.inhibit-polling"> <description>Inhibit media detection</description> <description xml:lang="da">Undertryk medie detektion</description> <description xml:lang="de">Medium-Erkennung unterdrücken</description> <message>Authentication is required to inhibit media detection</message> <message xml:lang="da">Autorisering er påkrævet for at undertrykke medie detektion</message> <message xml:lang="de">Zugriffsrechte werden benötigt um Mediumerkennung zu unterdrücken</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> <action id="org.freedesktop.udisks.drive-set-spindown"> <description>Set drive spindown timeout</description> <description xml:lang="de">Laufwerks-Zeitabschaltung setzen</description> <message>Authentication is required to configure drive spindown timeout</message> <message xml:lang="de">Zugriffsrechte werden benötigt um die Laufwerks-Zeitabschaltung zu konfigurieren</message> <defaults> <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> </defaults> </action> </policyconfig>
plik ~/.xinitrc
if which dbus-launch >/dev/null && test -z "$DBUS_SESSION_BUS_ADDRESS"; then eval "$(dbus-launch --sh-syntax --exit-with-session)" fi exec startfluxbox
Grupy (z debiana)
adam lp dialout cdrom floppy audio video plugdev
We fstabie faktycznie dyski mam w /media montowane.
Ostatnio edytowany przez ilin (2010.08.22 16:50:03)
Offline